The DeWalt DW718 is a 12-inch miter saw, which dual-cone is equipped with a powerful 15 amp motor that operates at 3,600 RPM. The slopes from 0 to 48 degrees, it is better to cut capacity and there are four cone-stops at 0 degrees, 22.5, 33.9 and 45 in both directions, so that you can flip the saw instead the material cutting.
DeWalt DW718 has a very precise miter system with a support base fence work, in order to makePrecise cuts at any time. Adjustable stainless steel stop plate is another great feature, because there are 10 positive stops to help you have better accuracy and durability.
The vertical cutting capacity is also very nice with this cutter. And miter 60 degrees left and 50 degrees to the right and is able to cut vertically 3-1/2 and 3-1/4 crown base vertically.
Another important aspect of this model is the DeWalt miter locking cam. This makes the saw easier to use andgives you a more accurate positioning of the miter table. There is also a large sliding fence supports crown molding up to 6-5/8 inches vertically nested and base molding up to 6-1/2 inches against the wall. This can be easily moved off the road, but if you need to make diagonal cuts.
You are in a position to 2x16 dimensional lumber and lumber at 90 degrees to 45 degrees 2x12 inch with the built-in fence design. DeWalt DW718 is the weight of 53 pounds, and although it is notwith a laser, you can equip one, because it works with the DW7187 Laser System.
0 comments:
Post a Comment